Small
- Build
- 6–9 process containers and an edge data centre in the first pilots. Once commercial, a unit can be as small as one closed-loop container.
- Install
- 4–6 weeks, series unit
- Suits
- Ships, waste-to-energy, distributed industry, pilots
Aethera is a modular platform, built into standard containers, that captures CO2 at industrial sites and turns it into products, data and revenue. Engineered in Norway for heavy industry everywhere.
2027First pilots Pilot programme in preparation One outside Europe, one in Europe, then Norway. Stay tuned for the first site.Emitting CO2 in Europe has a price, and it keeps rising. The tools to cut it are either energy-intensive, expensive or slow to build.
Forecasts point to €126 or more by 2030, and importers start paying through CBAM certificates from 2027.
Conventional solvents regenerate at 120 to 150 °C. Direct air capture still costs more than €500 per tonne.
Each one is engineered site by site. Too slow and too heavy for the thousands of emitters that need a solution.
Nothing on the market today is low-energy, quick to deploy and pays for itself. That is the gap Aethera is built to fill.
EU allowance price from S&P Global, 5 October 2026. Forecast and cost figures are industry estimates.
Capture, compress, bury. Proven, but it flies the same route every day and CO2 stays a cost.
Better sorbents and direct air capture. A real leap, for one function.
Capture, conversion, AI and data in one modular platform. CO2 becomes products, revenue and insight.
Each module is a standard shipping container with one job. Together they take flue gas in and send finished products out. A site can also take only the modules it needs.
Every configuration ships with AetheraMind and the edge data centre, so every site feeds the same fleet.
Plug-together containers. Deploy all of the modules, or only the ones a site needs.
Captured CO2 becomes products and data, not only an avoided cost.
Every unit learns, and each one makes the rest of the fleet better.
The heart of Aethera is a capture cassette that layers three different metal-organic frameworks. It holds on to CO2 and lets it go again with low-grade heat the site already throws away.
A MOF is a crystal built like scaffolding at the scale of molecules: metal joints held together by organic struts. The structure is mostly empty space, so a single gram can have the inner surface area of a football pitch, and the pores can be tuned to attract one molecule over another.
No single MOF gives high capacity, moisture tolerance and low-energy release at the same time. Stacked in the right order, three of them can. CO2 is held by physical adsorption, not amine chemistry, which is why it lets go at lower temperatures.
| Amine solvent | Direct air capture | Aethera target | |
|---|---|---|---|
| Release temperature | 120–150 °C | about 100 °C | 80–120 °C |
| Energy per tonne | 2.5+ GJ | 10+ GJ | ~1.8 GJ |
| Capture rate | about 90% | 85%+ | >92% |
| Time to install | 6–12 months, fixed plant | Months, fixed plant | 4–18 weeks per series unit |
| Captured CO2 | A cost to store | A cost to store | Feedstock for products |
Aethera figures are design targets for the integrated system, not measured results. They will be validated in the 2027 pilots. Comparison figures are indicative, from public sources.
AetheraBio is a staged reactor. Microorganisms do the first and hardest part of the work at mild temperatures, and catalysts finish it. Which product comes out is chosen for each site.
Some microorganisms live on CO2. Like plants, they use it as their source of carbon and build it into larger molecules. Unlike a field of crops, they do it in a closed tank, around the clock, with no land and no weather.
Catalysts then do what biology does slowly or not at all: they reshape those molecules into exactly the product a buyer wants. Splitting the work into stages lets each step run at its own best conditions, so the same module can be tuned for fuels at one site and materials at another.
A simplified picture of the conversion principle. Organisms, catalysts and product routes are selected for each site during engineering.
Compressing CO2 creates pressure pulses and vibration, and that energy is normally lost. Aethera puts piezoelectric components where it happens, to recover part of it and to sense what goes on inside the pipes.
Some crystals and ceramics produce a voltage when they are squeezed, and change shape slightly when a voltage is applied to them. The effect is long proven. It is what sparks a gas lighter and keeps time in a quartz watch.
Inside the crystal, positive and negative charges normally sit in balance. Squeeze it and they shift apart, so one face turns positive and the other negative. Connect the two faces and a current flows.
Piezoelectric energy recovery, sensing and actuation are part of the Aethera design and will be validated in the pilots.
Scale comes from adding standard trains of containers, not from engineering a new plant. Every size shares one digital layer.
Install times assume series units and a mature supply chain. The first pilots are first-of-a-kind and take longer.
Move the slider to your site’s yearly CO2 emissions and see roughly what an Aethera installation would look like.
Illustrative only. Based on design targets and standard sizes. A real installation is sized during front-end engineering, from the site’s gas composition, heat and space. Car figure from the US EPA.
Captured CO2 is a raw material. Which products a site makes is chosen during engineering, from local demand, energy prices and buyers.
Near term
Volume
Long-term upside
Prices are indicative market ranges, not NorthShield offers. Also possible: urea, bioplastics, biomethane, synthetic graphite and sodium carbonate.
The same containers serve very different industries. What changes is which modules a site takes, and how many.
Process CO2 that cannot be designed out, and a steady flue-gas stream.
Full loop, medium to largeUrban incinerators with heat on site and local buyers for products.
Full loop, small to mediumOnshore and offshore, close to storage and facing rising CO2 costs.
Capture or full loop, largeContainerised units on board and in port, ahead of IMO rules for onboard capture.
Capture only, smallHigh-volume off-gas and strong demand for low-carbon steel.
Full loop, largeSites that already capture CO2 can plug straight into our conversion modules.
Conversion only, medium to largeAlso hydrogen, bioenergy, pulp and paper, greenhouses and CO2 hubs.
Each Aethera system ships with its own edge data centre. From the first pilot onward, the fleet builds a record of how capture and conversion behave across sites, gases and seasons.
Gas composition, heat, pressure, vibration and biology, measured continuously.
An on-site container for real-time control and local AI. Process data stays secure on site.
Software that learns across the whole fleet: optimisation, predictive maintenance and smarter start-ups for every new site.
Two pilot sites are in preparation, and we are aiming for a third in Norway. Each one puts a complete Aethera system on a working industrial site and runs it long enough to prove it in the field.
We will write when a pilot site is confirmed, when the first containers ship and when the first CO2 is captured. A few emails a year, nothing else.
The first unit is the most expensive one we will ever build. Everything after it reuses the same engineering.
Close the seed round, complete the founding team and sign pilot partners.
Build and commission the first pilot systems. The data engine starts.
Standard containers in volume, in-house MOF cassettes, first component and data revenue.
More than 4,000 operating hours per pilot, then full commercial roll-out.
Hundreds of units across heavy industry, with a target cost of €55–85 per tonne before product revenue.
NorthShield Group was founded in Oslo in 2025 to make carbon capture pay for itself. We build on Norway’s offshore and process-industry engineering tradition, and on dialogue with researchers in Norway and the UK, to turn proven components into one integrated platform.
Every performance figure on this site is a design target until our pilots measure it. We would rather show you the data than the adjectives.
If you have built hard things in process engineering, materials science, controls or industrial software, we want to hear from you.
Whether you run an industrial site, invest in climate infrastructure, buy low-carbon products or research this field, we would like to hear from you.